Basic training on how to drive a low-level order picker or any kind of ride on pallet truck, is mandatory for anyone who wants to be an operator. These are essential machines normally used in warehouses as they are more efficient, easier and cheaper to operate, especially for high speed order picking and transporting loads of up to 2,000kg through long distances.
You must adhere to all health and safety standards when operating a low-level order picker. Keep in mind that inspection and maintenance are vital tasks that should be performed regularly to get the most out of these machines.
Operating a low level order picker
Don’t try to operate a low-level order picker until you receive adequate theory and practical training. Several tips will avoid equipment damage or physical injury. To keep your operations on track, follow these steps:
Before you start
• Know the maximum lifting capacity of the machine. The information should be displayed on the metal data plate installed on the chassis. Notify your supervisor if the machine does not have a display of this information.
• Review all operator documentation such as manuals. Crucial information in these documents may be unique to your equipment and not so obvious.
• Check for any disconnected, worn out or broken parts. Report any issues immediately to the supervisor.
• Familiarise yourself with the safety features, including the reversing switch or auto-braking system.
• Ensure a tight grip on the controls and the correct body balance.
• First, unplug the battery from the charger and take out the charging cable.
• Set all forks at their lowest position.
• Twist the controller clockwise to move the machine forward and anticlockwise to move it in reverse.
• Use the controller to steer the low-level order picker into the direction you want to move.
• Use the control marked with an up arrow to raise the forks off the ground.
• To drive the machine to either side, use the tillerhead. You are only required to steer since the powerful motor will propel the machine in the desired direction.
• To pick up the pallet, lower the forks to the ground using the control marked with a down arrow. Once the pallet is in place, lift the forks and drive to the required destination.
• Plug the machine back to the charger when you’re done.
Think about how to safely operate the machine as part of the required overall safety policy to protect people, the company and your equipment. Exercise caution when driving the machine in areas with pedestrians or traffic, including where other low-level order pickers are loading and unloading or coming out of the aisle. This constant assessment of risk should form the basis of work systems, and you must also consider the extra risk associated with high speed driving operations.
Prohibit any unauthorised personnel from accessing areas where the machines are operating and only allow operators or supervisors. In cases where this is not possible, consider the risk to pedestrians, and then provide risk control measures, including the following:
• Use a physical barrier to separate areas where machines are operating from pedestrian activities
• Define and mark the designated routes and crossing places for pedestrians
• Use several clear warnings to alert people that low-level order pickers are operating in the vicinity
• Display instructions for other operators to sound horns at suitable areas
• Use other visibility measures such as CCTV, mirrors or reversing bleepers
All operating areas must be designed properly and maintained regularly. The surfaces should be firm and level, preferably concrete, especially for low level order pickers like the EPT20-RAP. But other machines, such as the ride on pallet truck type RPL201 are designed to operate even in more uneven or rough surfaces.
Planned routine maintenance is essential as it helps the machine to run efficiently and identifies potential problems. Most low-level order pickers are serviced according to the hours they operate, and a vehicle handbook from the manufacturer will provide all details of the model. If you operate in unusually harsh or corrosive conditions, there may be additional requirements.
Maintenance should only be performed by people with relevant training, instruction and information. As an operator, you should not perform adjustments or repairs, unless you’re authorised and qualified to do so. Keep an updated record of all maintenance checks. Although it is not a legal requirement, keeping a maintenance log will help you identify any recurring issues.
Conduct a thorough examination of all the parts, such as the wheels, forks, drive unit, steering and brakes once a year. A competent person will perform the annual checks and draw up a scheme you can use for intermediate checks.
Before operating the machine, conduct pre-use checks so that you can report any defects immediately. Always carry a copy of the last inspection; the document identifies whether the work equipment is fit for operation, adjustment and maintenance without causing any safety and health risks. Any defects should be reported, and the machine should not be used until the faults are fixed.
Electrically powered lift trucks have powerful traction batteries which must be maintained correctly. In case of conventional lead acid batteries, ensure that while charging there are no sparks or flames nearby as any source of ignition can cause an explosion. Maintain the electrolyte at the recommended levels after charging the battery in order to assure long battery life time. For this work take well care of personal protective equipment.
Observe safety precautions at all times when operating EP’s low-level order pickers. Ensure all pedestrians in the vicinity have designated areas to walk on to operate the machine efficiently. Check the equipment regularly as routine maintenance is vital. A high-quality and versatile pallet truck such as the EPT20-RAP will guarantee optimal performance, especially if you observe all the tips discussed.
To talk more about our range of low-level order pickers please contact us today.